Figure 2.7.1 scan test setup interface
Fig. 2.7.2 scan test interface
2.8 Battery test operation
Battery test function is often used to test battery discharge performance, the electronic load ca
n work in a constant current or resistance mode, can be convenient to determine the discharge capa
city of the battery.
Parameter setting interface operation instructions
:
1.Press the [Shift]+ [
◀
] (Menu) key to enter the battery settings interface under the battery test main interface; 2.
Select the operation items by the rotary knob; 3. Switch the settings options by pressing the
[Enter] key for non-digital parameters; 4. For digital parameters, press the [Enter] key to enter the
editing mode, select the appropriate number of digits through the direction key, and then rotate the
spin. Button adjustment value, [Enter], [Esc] key quit editing; 5. press [Esc] to return to the next
level interface.
Test interface operation instructions
:
1.Press [On/Off] to start or close mode.
16