DECEMBER 3, 2019
EASITRACK
1
Installation with OBD Connector
Overview
This installation guide is for the additional OBD cable we offer as a substitute for even easier
installation. This document serves as a walkthrough on how to successfully install GPS Devices
using the OBD Connector.
OBD2 Power Connector
Just connect the cable to the OBD2 port of your vehicle and the other end to the EasiTrack
GPS tracking device.
Installation Steps:
Step 1)
L
ocate the vehicle’s OBD2 Port.
Typically, it can be found in the foot well of the
vehicle on the
driver’s
side. See Figure A
Step 2)
Locate a covert spot for the GPS tracking device. We recommend areas under
or within the dashboard. The device should be facing up towards the sky with the
label on top. Mount and secure the device with adhesive tape or zip ties.
Ensure that the unit is secure and cannot move freely and that the area the unit is
mounted in will not get wet or be subject to the elements.
OBD Connector
GPS Tracking Device
