4
Safety instructions
Read the entire manual carefully before installing
and operating the product. Observe the following
instructions:
Safety instructions for the installation
— This product shall only be installed, repaired or
serviced by an authorised electrician. All applicable
local, regional and national regulations for electrical
installations must be respected.
— Danger to life due to high electrical voltage. Never
make any changes to components or connecting
cables.
— The installation must not be carried out in the vicinity
of explosive atmospheres or in areas where there is a
risk of flowing water.
— The product must be installed on a permanent
location.
— The terminals in the backplate are energised when
the power circuit is closed and must never be in direct
contact or in contact with anything other than the
plug-in electronics (Chargeberry).
— Depending on the type of installation, official
authorisations may be required prior to installation.
Safety instructions for operation
— Danger to life due to high electrical voltage. Never
make any changes to components or connecting
cables.
— Always have the prescribed maintenance, installation
and any repair work carried out by an authorised
electrician and in accordance with local requirements.
— If a fire occurs, do not use water for extinguishing.
Never clean the product with high pressure or running
water.
— Do not immerse the product in water or other liquids.
— It is advisable to have an extra protection around the
post when mounted in an open parking space.
— Make sure that children do not play with the product.
— Do not use extension cords or unapproved adapters in
combination with the product.
— Even if the Charging Robot is designed to withstand
normal weather conditions, we recommend
protecting it from direct sunlight or exposure to
extreme weather conditions.
— Do not use the product near strong electromagnetic
fields or in the direct vicinity of radio transmitters.
