EAS Electric EMD12I, Руководство пользователя

Страница: 62 / 80

59
¡NOTE!
*EN50242: This programme is the test cycle. The information for comparability
test in accordance with EN 50242, as follows:

Capacity: 9 setting.

Position upper basket: upper wheels on rails.

Rinse aid setting: 6

PI:0.49w; PO:0.45w
6.2 Turning on the appliance
Starting a cycle wash
1. Draw out the lower and upper basket, load the dishes and push them
back.
It is recommended to load the lower basket first, then the upper one (see
the section entitled “Loading the dishwasher”).
2.
Pour in the detergent (see the section entitled “Salt, Dete
rgent and Rinse
Aid”).
3. Insert the plug into the socket. The power supply is 220-240 VAC/50Hz,
the specification of the socket is 10A 250VAC. Make sure that the water
supply is turned on to full pressure.
4. Open the door, press the ON/OFF Button, and the indicator will light.
5. Press the program Button, the wash program will be changed as follows
direction:
Intensive> ECO>90mins>RAPIDO
If a program is selected, the indicator will light. Then close the door, the
dishwasher begins to start.
6.3 Change the program
1. A cycle that is underway can only be modified if it has only been running
for a short time. Otherwise, the detergent may have already been
released, and the appliance may have already drained the wash water. If
this is the case, the detergent dispenser must be refilled (see the section
entitled “Loading the detergent”).
2. Press the Start/Pause button, the machine will be in standby state, press
the program button more than 3s then you can change the program to
the desired cycle setting (see the section entitled
“Starting
a wash
cycle…”).
V.1