EAS Electric EMD12I, Руководство пользователя

Страница: 66 / 80

63
PROTECT AGAINST FREEZING
Please take frost protection measures on the dishwasher in winter. Every time
after washing cycles, please operate as follows:
1. Cut off the electrical power to the dishwasher.
2. Turn off the water supply and disconnect water inlet pipe from the water
valve.
3. Drain the water from the inlet pipe and water valve. (Use a pan to gather
the water).
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter at the bottom of the tub and use a sponge to soak up
water in the sump.
CLEANING THE SPRAY ARMS
It is necessary to clean the spray arms regularly for hard
water chemicals will clog the spray arms jets and bearings.
To remove the upper spray arms, hold the nut, rotate the
arm clockwise to remove it.
To remove the lower spray arm, pull out the spray arm
upwoard.
Wash the arms in soapy and warm water and use a soft
brush to clean the jets. Replace them after rinsing them
thoroughly.
HOW TO KEEP YOUR DISHWASHER IN SHAPE

After every wash
After every wash, turn off the water supply
to the appliance and leave the door
slightly open so that moisture and odors
are not trapped inside.

Remove the plug
Before cleaning or performing
maintenance, always remove the plug
from the socket.

No solvents or abrasive cleaning
To clean the exterior and rubber parts of
the dishwasher, do not use solvents or
abrasive cleaning products.
Only use a cloth with warm soapy eater.
To remove spots or stains from the surface
of the interior, use a cloth dampened with
water a little vinegar, or a cleaning product
made specifically for dishwasher.

When not in use for a long time
It is recommended that you run a wash cycle
with the dishwasher empty and then remove the
plug from the socket, turn off the water supply
and leave the door of the appliance slightly
open. This will help the door seals to last longer
and prevent odors from forming within the
appliance.

Moving the appliance
If the appliance must be moved, try to keep it in
the vertical position. If necessary, it can be
positioned on its back.

Seals
One of the factors that cause odours to form in
the dishwasher is food that remains trapped in
the seals. Periodic cleaning with a damp sponge
will prevent this from occurring.
V.1