TM
PLEASE READ ALL WARNINGS PRIOR TO ASSEMBLY TO AVOID INJURY OR DAMAGE TO YOUR PRODUCT.
MAKE SURE ALL COMPONENTS ARE UNPLUGGED DURING ASSEMBLY.
• GROW LIGHTS ARE INTENDED FOR INDOOR USE ONLY.
• GROW LIGHTS ARE INTENDED FOR USE AS A HANGING LIGHT - IT SHOULD NOT BE ATTACHED TO ANY
SURFACE DIRECTLY.
• FOR SAFETY REASONS ALWAYS MAINTAIN 8-12” CLEARANCE ON ALL SIDES OF LIGHT.
• POWER CORD SHOULD RUN UP AND AWAY FROM THE TOP OF THE LIGHT.
• ANY HANGING MOUNTS SHOULD BE SECURELY ANCHORED DIRECTLY INTO CEILING STUDS, OR
HANGING FROM WEIGHT APPROPRIATE EXPANDING DRYWALL ANCHORS (50LB. LOAD PER ANCHOR).
• DO REMOVE ANY PROTECTIVE COVERINGS INSIDE THE GROW TUBE LIGHT BEFORE USE.
• DO TAKE PRECAUTIONS TO REMOVE FINGERPRINTS, DUST, OILS AND DEBRIS WITH GENTLE WINDOW
CLEANER FROM SURFACE OF LIGHT BULB BEFORE USE.
• NEVER USE A PUNCTURED OR CRACKED BULB - EVEN IF IT WORKS, SHUT OFF IMMEDIATELY, ONCE
COOLED, REPLACE BULB.
• NEVER LOOK DIRECTLY AT THE LIGHT WHEN IN USE TO PREVENT DAMAGE TO YOUR EYESIGHT.
• NEVER ATTEMPT TO REPLACE LIGHT BULBS, MOVE, CLEAN, SPRAY WHILE UNIT IS PLUGGED IN OR
WITHOUT GIVING COMPONENTS TIME TO COOL.
Grow Light Kit
Copyright 2011 DTX International
www.earthworth.com
Assembly Instructions
• To avoid shattering or cracking lamp, do not allow lamp to ever contact water.
• If lamp breaks while in use, turn off system and allow bulb to cool completely before removing.
• For optimal performance, replace HPS lamps every 18 months and MH lamps every 12 months.
• If transferring your plants from a cooler lighting system, raise lights 12” higher than recommended
and increase exposure times gradually over a few days to prevent sunburning your plants.
• Light output may seem to wobble - this is to be expected with new bulbs and light should stabilize
after the first 100 hours of burn time.
• Lights take about 15-20 minutes to reach fullest intensity.
• Small glass debris inside the bulb is fairly common and does not affect performance.
• Do check for fissures or cracks in the bulb, even if light is working the bulb should be replaced
immediately.
Grow Light Kit Tips:
600 Watt - 36”-48” from plants
1000 Watt - 48”-72” from plants
400 Watt - 24”-36” from plants
