wall
bracket
tape
backing
wall
shelf
EG10044 Revised 01/08
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-9905 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
PART #357473
ASSEMBLY INSTRUCTIONS
Snap-n-Slide
®
Wall Shelves
CAUTION
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
wall
Step 1 - Mount brackets in relation to studs behind wall.
Step 2 -
Slide the wall shelf into desired placement.
Step 4 - Lower shelf and press firmly over brackets to lock into place.
Step 3 -
Hold shelf in place and peel off tape backing.
stud behind
wall
wall
bracket
wall
(End)
tab on
bracket
left-hand
wall bracket*
right-hand
wall brackets*
upturn
on wall
shelf
* Quantity of wall brackets varies with length of shelf.
CAUTION:
Wall brackets must be
fastened securely prior to
mounting shelf. Eagle
Group cannot be held
responsible for the failure to
use the appropriate secure
mounting method.
CAUTION:
A secure means of fastening the wall brackets prior to mounting shelf must be utilized.
Eagle Group will not be held responsible for wall brackets pulling away from the wall.
In order for proper bonding of the tape adhesive, ensure the bottom of
the shelf is free of dirt, oil and other contaminants prior to installation.
