8
WARNINGS, CAUTIONS, AND RECOMMENDATIONS
Read and understand the instructions contained in these instructions
for use before install or operate this equipment.
The operation of this device may be dangerous for patient and operator
unless safe exposure factors and operating instructions are observed.
Personal protective equipment must be used with this device.
Use the equipment only if in perfect conditions and protect yourself,
patients and third parties against possible dangers.
This equipment must be installed and operated by personal acquainted
to the necessary precautions to avoid excessive exposure to primary
and secondary radiation.
The New IDA sensor has three different interactions with the user. They
are:
Identification label: Placed in the lower part of the product package;
Security symbology: Placed in the upper part of the sensor on its
identification;
- Image acquisition software: Found installed with a computer where
the sensor is connected.
This equipment meets the requirements of the directive RoHS
(
Restriction of Certain Hazardous Substances
) (Directive 2011/65/UE)
and the Directive of Medical Devices (Directive 93/42/EEC). Please note
that the compliance with the directives RoHS is ensured by the
exclusive responsibility of the manufacturer.
Non-authorized modification of the product or of the configuration
invalidate the CE marking
DURING TRANSPORTATION AND STORAGE
The equipment must be shall be carried and stored according to the following:
Handle with care to avoid falls and impacts.
The arrows on the package must be pointing upwards.
Don't stack items above the quantity indicated on the packaging
Protect against sunlight, humidity, water and dust.
Observe the limit of temperature, pressure and relative humidity
