Eagle new IDA Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 63

background image

10

The manufacturer assumes NO liability:

• If the equipment is used for other purposes that are not the ones for
what it was originally designed.

• For damages caused to the equipment, operator and/or patient as
result of incorrect installation and maintenance procedures that are not
in compliance with the operation instructions that comes with the
equipment.

• For inappropriate operation of the equipment.

Prevention against cross contamination



To help to prevent the cross contamination among the patients, it is

mandatory the use of disposable protective plastic covers.



The covers must be properly disposed of for each new patient.



The protective plastic cover must cover the sensor and at least 10 cm of

the USB cable.



Don't ever use damaged protective plastic covers.

AFTER USE / OPERATION OF THE EQUIPMENT



Turn off the equipment when it is not being used for an extended period.



The protective plastic covers must be disposed for each new patient to
avoid the transmission of infectious agents that can cause serious
conditions.



Perform the cleaning and disinfection according to the instructions
contained in this manual.



Don't modify any part of the equipment.

PRECAUTIONS IN CASE OF CHANGE IN THE PERFORMANCE OF THE EQUIPMENT

If the equipment presents any abnormality, verify id the problem is related to any

item listed in the topic: "Error Diagnosis" of this user manual. If it is not possible to solve
the problem, turn off the equipment, disconnect the cables.

In the event of damage or defect do not use the equipment and contact
an Authorized Service Alliage.

«
...
8
9
10
11
12
...
»

Содержание new IDA
































































Отзывы:

Нет отзывов

Похожие инструкции для new IDA

Бренд: Ultimaker Страницы: 38

Бренд: A&D Страницы: 2

Бренд: A&D Страницы: 176

Precision2 HP2 Series

Бренд: B-K lighting Страницы: 6

Бренд: Zero Hand Truck Страницы: 38

Бренд: B-K lighting Страницы: 3

Бренд: Parker Страницы: 5

Бренд: Bacharach Страницы: 31

Бренд: Backyard Play Systems Страницы: 52

Бренд: Backyard Play Systems Страницы: 19

Бренд: Backyard Play Systems Страницы: 44

Бренд: Bacharach Страницы: 2

Бренд: Xebex Fitness Страницы: 15

Бренд: qeedo Страницы: 2

Бренд: Kellfri Страницы: 12

ActiveFinder One

Бренд: LaserLiner Страницы: 92

Бренд: Vatech Страницы: 137

Бренд: Vatech Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды