TO PROGRAM MULTIPLE LAMPS
The lamps are individually coded
One remote control works for all the lamps in a set
Multiple sets can be used in the same
location without interference
You can program the lamps, and one
remore can control up to 24 lamps.
To program the lamps for one remote
control
1.
Ensure the batteries are in the remote
control
2.
Place 2 batteries in the lamp that you
wish to connect, then keep the centre
of the lamp pressed down while you
insert the 3rd
3.
Within 10 seconds, press both ON and
OFF buttons on the remote control,
then release
Repeat steps 1-3 to add more lamps
