ASSEMBLY INSTRUCTIONS
RediPak Shelving
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2001 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Fdsrv) 800/441-8440 • (MHC/Retail) 800/637-5100 • Fax: 302/653-2065 or 302/653-3036
EG9832 Revised 02/01
RediPak post w/ components shown
Post Assembly
unpack carton
to confim amount and identity of
components.
lower post
Take the lower post half (lower post half has a
casting assembled to both ends) and screw one
threaded rod into the top and one leveling bolt into
the bottom.
upper post
Take the upper post and screw it into the threaded
rod of the lower post half. Ensure there is a
secure fit between the two posts.
Repeat
steps 2 and 3 for the remaining posts. When
all posts are assembled, follow the shelving assembly
instructions to assemble the shelving unit.
▲
▲
Parts List
• shelf*
• split sleeves pack*
• hardware pack containing:
leveling bolts 4/pack
threaded bolts 4/pack
• upper post half 4
• lower post half 4
*4 or 5 dependent on kit ordered
4 shelf unit shown assembled
plastic cap
top half
of post
casting
casting
double threaded
bolt
casting
bottom half
of post
leveling
bolt
PART # A203656
