Eagle Eye SG-Ultra Max, Инструкция по эксплуатации

Страница: 43 / 73

43
EN
1. Tap <Menu> and select Setup > RFID > Read Tag .
2. Hold the RFID tag to the RFID interface of the instrument until the RFID
tag information is displayed.
3. To read another RFID tag, tap <Back>, then select "Read Tag", and
continue with step 2.
4. Tap <Back> repeatedly to return to the main screen.
Programming RFID tags
1. Tap <Menu> and select Setup > RFID > Write Tag .
2. Select "Method" and tap <Edit>.
3. Select the method to be written to the RFID tag from the list.
4. Select "Sample ID" and tap <Edit>.
5. Select the sample ID to be written to the RFID tag from the list.
6. Hold the RFID tag to the RFID interface of the instrument.
7. Select "Write Tag" and tap <OK>.
The selected sample ID and method will be written to the RFID tag.
8. Repeat this procedure to program further RFID tags with sample IDs and
methods.
9. Tap <Back> repeatedly to return to the main screen.
Erasing RFID tags
You can erase the information on an RFID tag, e.g. to correct a writing
mistake or to reuse an RFID tag for a new sample ID and method.
1. Tap <Menu> and select Setup > RFID > Erase Tag .
2. Hold the RFID tag to the RFID interface of the instrument.
3. Tap <OK>.
4. To erase another RFID tag, select "Erase Tag" and repeat steps 2 to 3.
5. Tap <Back> repeatedly to return to the main screen.