EAE MONA SWITCH V2, Руководство по эксплуатации продукта, Страница: 31 / 34

Product Manual Mona Switch V2
EAE KNX Mona Series
MONA Switch R3.0
©
EAE Technology www.eaetechnology.com Page 31 / 34
4.7.2. Inputs
4.7. 2.1. IN1…15
Parameter Settings Description
Name
32 chracters are allowed.
(Optional)
Any name can be defined for each Input. Name will be
shown in ETS Parameters and Group Objects page.
Data Type 1-bit / 2-bit / 1-byte Logic Input Data Type can be selected.
Preprocess
(if Data Type : 2-bit)
(if Data Type : 1-byte)
Passthrough ,
NOT,
always True,
always False,
equal,
NOT equal,
in range,
NOT in range,
matches any of two,
NOT matches any of
two,
bits SET,
NOT bits SET,
bits CLEAR,
NOT bits CLEAR,
thresholds,
NOT thresholds
Passthrough: Input will be proccessed as it is.
0 is OFF, 1…255 is ON
NOT: Input will be reverted.
0 is ON, 1…255 is OFF
always True: Process will always be True regardless to
input value.
always False: Process will always be False regardless to
input value.
equal: If the Input value is equal to ETS written value, the
result will be “True”.
NOT equal: If the Input value is NOT equal to ETS written
value, the result will be “True”.
in range: If the Input value is in range between written
values on ETS, the result will be “True”.
NOT in range: If the Input value is NOT in range between
written values on ETS, the result will be “True”.
matches any of two: If the Input value matches with the
any of values on ETS, the result will be “True”.
NOT matches any of two: If the Input value does NOT
match with the any of values on ETS, the result will be
“True”.
bits SET: If all masked bits of the Input Value is set, the
result will be “True”.
NOT bits SET: If all masked bits of the input value is set,
the result will be “False”
bits CLEAR: If all masked bits of the Input Value is clear,
the result will be “True”.
NOT bits CLEAR: If all masked bits of the Input Value is
clear, the result will be “False”.
thresholds: Input value must be;
equal or greater than “True if > =” value for result
“True”.
equal or lower than “False < =” value fo result “False.
NOT thresholds: Input value must be;
equal or greater than “True if > =” value for result
“False”.
equal or lower than “False < =” value fo result “True”.