Eachine EX4, Руководство по эксплуатации

Страница: 34 / 44

EX4 Operation Manual
---31 ---
 Beginner Mode On/Off
Before the aircraft takes off, the Beginner Mode can be turned on or off. The flight distance will be
greatly limited under Beginner Mode.

Virtual Joystick Setting:
Before the aircraft takes off, the virtual joysticks can be set as “Left-Hand Throttle” or “Right-Hand
Throttle”.

Alt Limit setting:
Limits the aircraft’s flight height before it takes off. The default height is 120m, and it can be set to
30m~500m.

Voltage:
Displays the current battery voltage of the aircraft.

Low Power Alarm
User can set the limit for the battery-low alarm. The default is 10%, and the range is from 10% to
80%.
 Sensor Calibration:
Vertical or horizontal compass calibration. Please refer to the relevant introduction in this manual.
 Pair RC
Remote control pairing. Please refer to the relevant introduction in this manual.
 Firmware Version:
Tap to view the current application version, flight control firmware version, relay firmware version,
remote firmware version and image firmware version.
 Audio Recording:
Turn recording on or off (off is default). When turned on, user can record the audio on the mobile
phone while the aircraft camera is recording a video.
 Distortion Correction
When turned on, it will correct the distortion of the photo taken by the wide-angle lens.
 Gesture Recognition:
When turned on, user can control the camera to take photos or record videos with a specific
gesture. Please refer to the relevant introduction in this manual.
 UnBind APP:
Unbind the current APP from the aircraft. Only after that, other users can bind this aircraft.
Flight Modes for APP
Position Mode
：
The default flight mode is position mode. When the aircraft is positioned (the aircraft status
indicator is solid green), aircraft will be unlocked.
In this mode, the aircraft will be positioned automatically by GPS, so it has better flight stability and
safety.