Each Energy EES3K-M1, Руководство пользователя

Страница: 5 / 25

7 8
3. Safety
3.1 Safety Symbols
Symbol Explanation
DANGER
Indicates a high level of risk which, if not avoid, may
result in death or serious injury
WARNING
Indicates a medium level of risk which, if not avoid,
may result in death or serious injury
CAUTION
Indicates a low level of risk which, if not avoid, may
result in minor or moderate injury
NOTE
Indicates a situation which, if not avoided, may
result in device damage or property damage
ELECTRIC SHOCK
Indicates a danger of electric shock or high voltage
HOT SURFACE
Indicates hot surface, do not touch
WAIT
Notice of waiting at least 5 minutes before operation
3.2 Safety Instructions and Notice for Use
The inverters involved in this manual comply with applicable safety and
technical regulations in design and test. To avoid personal injury and property
damage and to ensure longer service life of the machines, please read this
manual carefully and observe all safety information during operation.
Improper operation may result in risk of person injury or damage to the
machine and to other property, so please ensure that the following
requirements are met before or during operation.

Installation of inverters must be performed by qualified technicians, and
be in compliance with applicable electrical standards, regulations and the
requirements of local power authorities.

Wear protective equipment for all work on the machines: helmet,
insulated footwear, gloves, etc.

Ensure that unauthorized persons and children have no access to the
machines.

Do not open the housing of the machines at any time. Unauthorized
opening will void guarantee and warranty and may damage the
machines.

Do not touch non-insulated parts or cables, disconnect the machines
from voltage sources and guarantee no possible re-connection before
working on the machine.

Use measuring devices with a DC input voltage range of 600 V or higher
only.

High voltage is present in the live parts and cables inside the product
during operation, wait at least 5 minutes after disconnecting voltage
sources.

The temperature of some parts of the inverter may exceed 60
℃
during
operation. To avoid being burnt, do not touch the inverter during
operation.

Pack inverters properly during transportation, and do not transport them
together with flammable material.

the inverters are to be installed in single phase circuit and should not be
installed in multiple phase combinations.
4. Mounting
4.1 Installation Location
WARNING
Do not select locations storing flammable material which may cause fire
or explosion!