29
30
6.2.5 Technical Set – Maintenance Personnel Only
This section is for maintenance personnel only, enter password to access the
sub-menu as guided by Chapter 6.2.4.
The sub-menu:
No.
Display
Explanation
1
To enable the setting-up of all
functions under the menu of
Technical Set
2
To set up safety standard or
country grid code for the inverters
3
To set up the high limit of AC
output voltage
4
To set up the low limit of AC
output voltage
5
To set up the high limit of AC
output frequency
6
To set up the low limit of AC
output frequency
7
To set up the max generation
power
8
To set up the AC instant voltage
limit
9
To set up the power control
10
To set up the increase power rate
limit and decrease power rate limit
11
To set up special functions
12
To set up passwords
13
To restore factory settings
14
To adjust the total power
generated
15
To clear the power generation
record
16
To turn on or turn off inverters
17
To set up export power limit
Press UP/DOWN to scroll the menu, press ENT to access the sub-menu, and
Pmax Limit
VAC L Limit
VAC H Limit
Standard Set
ALL Set Enable
Export Limit
FAC H Limit
FAC L Limit
Factory Reset
Special Func
Set Passwords
Standard Func
Power Control
Adjust Total E
Reset Total E
Inverter ON/OFF
AC Inst Limit
