E-Z-GO FREEDOM, Руководство пользователя и сервисное руководство

Страница: 30 / 156

OPERATION AND SERVICE INFORMATION
Page 10
Owner’s Manual and Service Guide
Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings
NEUTRAL LOCK
To prevent the driven clutch from turning the rear wheels
during service operations and to prevent wear to the belt
while being towed, a neutral lock is located at the direc-
tion selector or the rear axle.
On Rear Axle
To operate:
Position direction selector lever between ‘F’ and ‘R’. Turn
key switch to ‘OFF’. Rotate pin on rear axle shift lever as
shown (Ref. Fig. 13 on page 10). The pin will snap into a
cavity in the differential case. When in this position, the
direction selector remains locked in the neutral position.
To unlock the direction selector, pull the pin out and
rotate until the pointed portion of the pin handle fits into
the detent position in the rear axle shift lever.
On Direction Selector
To operate:
Turn key switch to ‘OFF’ and lift seat. Pull out and rotate
the neutral lock pin handle so that the pointed portion of
the handle is to the side of the direction selector cam
(Ref. Fig. 14 on page 10). Move direction selector
towards the area between ‘F’ and ‘R’. During that motion,
the pin will snap into the hole in the direction selector
mounting bracket preventing any movement. When in
this position, the direction selector remains locked in the
neutral position. To unlock the direction selector, pull the
neutral lock pin handle out and rotate until the pointed
portion of the handle fits into the hole in the direction
selector cam.
HAULING
To reduce the possibility
of severe injury or death
while transporting vehi-
cle:
Secure the vehicle and contents.
Never ride on vehicle being transported.
Always remove windshield before transporting.
Maximum speed with sun top installed is 50 mph
(80 kph).
If the vehicle is to be transported at highway speeds, the
sun top must be removed and the seat bottom secured.
When transporting vehicle below highway speeds, check
for tightness of hardware and cracks in sun top at mount-
ing points. Always remove windshield when transporting.
Always check that the vehicle and contents are ade-
quately secured before transporting. The rated capacity
of the trailer or truck must exceed the weight of the vehi-
cle (see GENERAL SPECIFICATIONS for vehicle
weight) and load. Lock the park brake and secure the
vehicle using ratchet tie downs.
Fig. 13 Neutral Lock on Rear Axle
Locked
Position
Unlocked
Position
Pull out and rotate 180
to lock
o
Long Tab
Short Tab
Unlocked
Locked
Pull out and rotate 180
to unlock
o
1
2
1
2
Ref Nlk 1
Fig. 14 Neutral Lock on Direction Selector
Unlocked
To
Lock
Hole in Direction
Selector Mounting
Bracket
Hole in Direction
Selector Cam
Neutral Lock
Pin Handle
1
2
Ref Nlk 2
! !