QSG-EVLT-00449_R00_XXXX00_01_EN_2022-11-02
7/17
COUPLERS
Different couplers are mandatories to test Housing or cooling system.
They must be connected on the test pipe fast connector..
POWER SUPPLY CONNECTORS
100 / 240 V AC connector (J7)
The device can be connected to a 100 / 240 V AC power supply (option).
This connector has a ON/OFF button.
It is mandatory to connect the device with a good link to the ground, to protect against electric
hazard or electrocution.
Interruptor ON/OFF
1
ON
0
OFF
DIGITAL LINKS
PC USB connectors (on front face)
USB connectors can be used for connecting miscellaneous compatible USB devices.
The USB connectors are located under the rubber cover 1 (see figure).
1
USB connector to PC
2
USB connector to USB key or barcode
reader
3
Rubber cover
Do not use a cable longer than 2 m.
Push the rubber cover 3 slightly forward for an easy access to USB connectors 1 and 2.
Only use this connection for temporary communication.
Connection to a PC cannot be used permanently because the communication can be discon-
nected by the PC.
1
2
3
