E100 User Manual
1.5
Power button
There is a power button on E100 control panel, the main function as below:
Power On
Long press button for two seconds to power on
receiver.
Power Off
Long press button for two seconds then release,
will hear the voice “Power off?” Then press the
button again to confirm.
Broadcast Current Working
Mode
Receiver will broadcast current working mode
when press the power button.
Self-check
Long press button for two seconds then release,
will hear the voice “Power off?” Then long press
button for three seconds, will hear the voice “self
-
check”.
2.
Web User Interface
User can connect to receiver WIFI hotspot with PC, smart phone or tablet. The hotspot
name is the device serial number, can be found under the bottom of the device label.
Open web browser and input the IP address “192.168.10.1”. The default user name is
“admin”, password is “password”. From the website, user can manage working status,
change working mode, configurate basic settings, download raw data, update
firmware and register device.
2.1
Position
View basic position information, satellite number, PDOP and time. In static mode, can
start and stop recording here.
