AEM30940 RF 868 MHz
Q
uick
S
tart
G
uide EVK
www.e-peas.com © 2020 e-peas S.A.
V2.2
FEATURES
Connectors
•
1 SMA connector for input power below -10dBm [LOW]
•
1 SMA connector for input power above -10dBm [HIGH]
•
1 screw con 1 JST connector for the Storage Element
•
1 screw connector for Primary Battery
•
1 screw connector for HVOUT LDO output (80mA @ 1.8
–
4.2 V)
•
1 screw connector for LVOU LDO output (20mA @ 1.2 or 1.8 V)
Configuration
•
2 jumpers SELMMP[x] to define the MPPT ratio linked to the harvester technology
•
3 Jumpers CFG[x] to define the storage element protection levels
•
6 resistors footprint related to the custom mode (CFG[2:0]=000)
•
2 jumpers to enable/disable the internal LDOs
•
2 jumpers to define the primary battery minimum level
•
1 jumper to set the dual cell supercapacitor BAL feature
•
1 resistors footprint to use the ZMPP feature (constant impedance)
Size
•
79mm x 49mm
•
4 x M2.5 Mounting holes
SUPPORT PCB
BOM around the AEM30940
Matching network and RF rectifier schematic under NDA signature
Footprint & Symbol:
Available on the
…
…
…
…
…
…
…………
…
…………
…………
…………
….……
…………
…………
…………
…………
…………
..
