AEM00940
Q
uick
S
tart
G
uide EVK
www.e-peas.com © 2022 e-peas S.A.
V1.0
FEATURES
Connectors
•
1 screw connector for the source (SRC) + 2 screw connectors for AC input signal (LF/MF)
•
1 screw con 1 JST connector for the Storage Element (BATT)
•
1 screw connector for Primary Battery (PRIM)
•
1 screw connector for HVOUT LDO output (80mA @ 1.8
–
4.2 V)
•
1 screw connector for LVOUT LDO output (20mA @ 1.2 or 1.8 V)
Configuration
•
2 jumpers SRC_LVL_RANGE[1:0] to define the GAIN ratio linked to the harvester technology
•
3 Jumpers CFG[2:0] to define the storage element protection levels
•
6 resistors footprint related to the custom mode (CFG[2:0]=000)
•
2 jumpers to enable/disable the internal LDOs
•
2 jumpers to define the primary battery minimum level
•
2 resistors to define the harvesting level
•
1 potentiometer to define the harvesting voltage
•
1 jumper to set the dual cell supercapacitor BAL feature
Size
•
79mm x 49mm
•
4 x M2.5 Mounting holes
SUPPORT PCB
BOM around the AEM00940
Footprint & Symbol:
Available on the
…
…
…
…
…
…
…………
…
…………
…………
…………
….……
…………
…………
…………
…………
…………
..
