manualshive.com logo in svg

E-Mu Xtreme Lead-1, Руководство пользователя

Поделиться
Скачать
E-Mu Xtreme Lead-1 Скачать руководство пользователя страница 40

40 

  E-MU Systems

Basic Operations

Main Screen

Channel Pan

Channel Pan sets the stereo position of the selected MIDI channel. This 
control operates like the balance control on your home stereo system. 
Channel Pan is the same parameter as MIDI pan controller #10, and 
changes made over MIDI are shown in the display.

Note:

 Pan settings in the preset ADD algebraically with the Channel Pan 

setting. Therefore, if the pan setting in the preset were set to “63

R

,” moving 

the Channel Pan setting full left would return the sound to the center 
position.

þ  

To Change the Channel Pan

1.

Press either cursor key until the cursor is underneath the pan field.

2.

Rotate the Data Entry Control to select a pan value. 64

L

 indicates a hard 

left pan, 63

R

 indicates a hard right pan. With a setting of “00,” the 

sound is centered in the stereo field.

Channel Arpeggiator

This function controls the arpeggiator for each MIDI channel. When the 
channel arpeggiator mode is set to Off, then there is no arpeggiation on 
that channel, regardless of what is set up in the Master Arpeggiator or 
preset. If the channel arpeggiator is On, the preset’s arpeggiator is used, 
regardless of whether or not it is turned on in the Edit menu. This lets you 
turn on arpeggiation from the main screen.

If the mode is set to “P” (for preset), the preset’s arpeggiator settings and 
on/off status is used. If the mode is set to “M” (for master), the master 
arpeggiator settings and on/off status (located in the Arp/Beats menu) are 
used. 

See the “Arpeggiator/Beats Menu” on page 43 for more information.

þ  

To Play the Arpeggiator (Quick Start)

1.

From the main screen, press either cursor key repeatedly until the 
cursor is underneath the arpeggiator field (A:).

2.

Rotate the Data Entry Control to select “P” for preset.

3.

Press either cursor key repeatedly until the cursor is underneath the 
Preset Category field and select “arp:” using the data entry control.

4.

Press the right cursor button to move it to the Preset Name field.

5.

Play notes or chords on the keyboard. Change presets as desired to 
audition the various patterns and presets.

079

3

    bts: Logic

C01      V127     P01

R        

A:off    USER 

Pan Position

Содержание Xtreme Lead-1


















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды