UC306W User Guide
UCx 4.5
11-Feb-2015
Page
of
23
30
Copyright © 2014 E-Metrotel
Global Inc.
Enable, categorize or set operational mode of Push-To-Talk (PTT).
Parameters
Description
PTT
Enable or disable the PTT function
PTT Group
Configure the PTT group number. Up to 4 groups are supported: 0 to 3.
PTT Authority
Select the user type: Normal User or Super User
: Can receive and initiate calls to users in the same group
Normal User
: Can receive calls from users in the same group, can initiate calls to users
Super User
in all groups
PTT Protocol
Select the protocol: Multicast, Broadcast or Unicast.
: Transmit intercom via the Multicast protocol (239.0.0.1)
Multicast
: Transmit broadcast via the Broadcast protocol (255.255.255.255)
Broadcast
: Transmit to Intercom Server (PTT Server Domain field is required)
Unicast
PTT Server
Domain
Enter the Intercom Server domain name or IP address. This is required when using
Unicast protocol.
4.6.1 PTT Usage
The phone must first be connected to WIFI, then the PTT function is ready for use. The PTT key is located
on the side of the phone.
