UCx Feature Guide for Nortel IP Phones
UCx 4.5
11-Feb-2015
Page
of
29
36
Copyright © 2014 E-Metrotel
Global Inc.
1.
2.
3.
4.
5.
1.
2.
3.
1.
2.
3.
4.
5.
1.
2.
3.
While the phone is idle, press the
key (the key with the globe on Nortel IP phones that use
Services
graphics)
Use the down arrow key to locate the
line
Ring type
Press the
soft key
Invoke
Use the
and/or
soft keys or digits to to select the desired ring type
Up
Down
0
7
Press the
soft key to save the selected ring type
Enter
6.6 Ring Volume
This feature allows the user of a Nortel phone to select the ring volume to be used by the phone.
6.6.1 Phones With Feature Key
While the phone is idle, press the
key and enter the feature code *80 (
- ring volume)
Feature
F*80
Use the
and/or
soft keys or digits to to select the desired ring volume
Up
Down
0
7
Press the
soft key to save the selected ring volume
Enter
6.6.2 Phones Without Feature Key
While the phone is idle, press the
key (the key with the globe on Nortel IP phones that use
Services
graphics)
Use the down arrow key to locate the
line
Ring volume
Press the
soft key
Invoke
Use the
and/or
soft keys or digits to to select the desired ring volume
Up
Down
0
7
Press the
soft key to save the selected ring volume
Enter
6.7 Contrast
This feature allows the user of a Nortel phone to select the display contrast to be used by the phone.
6.7.1 Phones With Feature Key
While the phone is idle, press the
key and enter the feature code *7 (
- display contrast)
Feature
F*7
Use the
and/or
soft keys or digits to to select the desired display contrast (depending on
Up
Down
0
9
the phone type, 4, 8 or 16 contrast levels are supported)
Press the
soft key to save the selected display contrast
Enter
6.7.2 Phones Without Feature Key
