UCx Feature Guide for Nortel IP Phones
UCx 4.5
11-Feb-2015
Page
of
23
36
Copyright © 2014 E-Metrotel
Global Inc.
1.
2.
1.
2.
3.
1.
2.
5.20 Accessing Voicemail
If your UC administrator has configured a mailbox for your extension, your phone will indicate with
X
a red lamp that you have message(s) waiting.
To access your mailbox, press the
key. Alternatively, press the
key and enter the
Inbox
Feature
feature code 981 (
- log into voice mailbox).
F981
Follow the voicemail prompts
5.20.1 Phones With VMsg Key
The VMsg soft key will appear when you have voice message(s) waiting. You can access your mailbox
directly by pressing the
soft key.
VMsg
The VMsg key is available only when Feature Key Mode is enabled by the UC administrator.
X
5.20.2 Phones Without Vmsg Key
To access your mailbox, dial *97
To access your mailbox from a different phone, dial
followed with your extension
*98
Follow the voicemail prompts
5.21 Static Time and Date
This feature is only applicable to phones with the Feature Key.
Press the
key and enter the feature code 806 (
) to set Static Time and Date feature ON
Feature
F806
Press the
key and enter the feature code #806 (
) to set Static Time and Date feature
Feature
F#806
OFF
5.22 Wake Up Call
To schedule a new wake up call for your extension, perform the following steps:
Dial
and you will be prompted to enter the time in 4 digits
*68
Enter the desired time in 12 hour or 24 hour format