UCx Feature Guide for Nortel IP Phones
UCx 4.5
11-Feb-2015
Page
of
17
36
Copyright © 2014 E-Metrotel
Global Inc.
1.
2.
1.
2.
3.
4.
5.
This feature can be invoked only using the system-wide star code.
5.8 Call Waiting
To activate call waiting, dial *70
To deactivate call waiting, dial *71
This feature can be invoked only using the system-wide star code.
To use call waiting, your phone must be configured to have 2 or more line appearances (line keys).
When you have 2 or more line keys and call waiting is enabled, you will receive additional incoming
calls until there is no free line key. When call waiting is disabled, you won't receive incoming calls if
you have a call on at least one of the line keys - additional line keys can be used only to make
outgoing calls.
5.9 Call History
key
key
To access the call log, press the
Outbox
. Alternatively, press the
Feature
and enter the
feature code 812 (
F812
- call log).
Press the
,
or
soft key to view the list of received, dialed or missed calls
Recvd Placed
Missed
Use the
to view call log entries
Up/Down Navigation keys
On Nortel phones with a single display line, use the
soft key to view additional information about
More
call log entries
Press the
soft key to call the phone number from the selected call log entry
Call
5.9.1 Calls key
The Calls soft key will appear when there are missed calls since the last use of the phone. On pressing the
soft key, details of the missed calls will be displayed.
Calls
This feature is available only when Feature Key Mode is enabled by the UC administrator.
X
5.10 Last Number Redial
