H820 User Manual
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: [email protected] www.e-lins.com
H820, if the SYS LED starts to blink in a few seconds, that means the system start-up is normal; if
the CELL LED works, that means the network is online; if the VPN light works, that means VPN
tunnel has been set up. Please refer to the below table for the situation of the indication lights.
Cha
pter
3
LED
Indication Light
Description
SYS
On for 25 seconds
On for 25 seconds after power supply
blink
System set-up normally
Off or still on after 25
seconds
System set-up failure
LAN1~
LAN4
blink
Data transmission in Ethernet
Off
Ethernet connection abnormal
On
Ethernet is connected
VPN
On
IPSec VPN tunnel set-up
Off
IPSec VPN tunnel set-up failure or inactivated
CELL
On
Access to the Internet/Private Network
WiFi
On
Enable
Off
Disable
WAN
blink
Data transmission in Ethernet
Off
Ethernet connection abnormal
On
Ethernet is connected
Signal
Off
No signal, or signal checking is not ready
blink ( 2 seconds for
on, and 2 seconds
for off)
Signal bar is 1
blink ( 1 seconds for
on, and 1 seconds
for off)
Signal bar is 2
blink ( 0.5 seconds
for on, and 0.5
seconds for off)
Signal bar is 3
