E-Lins H750, Руководство пользователя

Страница: 102 / 112

H750 User Manual
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com www.e-lins.com
from 1 to 32.

HTTP port : set HTTP port, the default port is 80.

HTTP access from WAN : allow or deny access router web management page from remote
side.

Remote network : Any IP Address, Single IP address, Subnet.

IP address
: fill a remote IP address that can access router web management page.

Netmask : 24 means net mask 255.255.255.0, 32 means 255.255.255.255, the illegal value is
from 1 to 32.

RFC1918 filter : reject requests from RFC1918 IPs to public server IPs.
3.6.9 Static Routes

Interface:
You can choose the corresponding interface type.

Target: the destination host IP or network.

IPv4-Netmask : the destination IP mask.

IPv4-Gateway : IP address of the next hop.

Metric : used by router to make routing decisions.

MTU
: maximum transmission unit

Table : the route table ID, the default value is 254, valid table ID 1-254.
Notice:

Gateway and LAN IP of this router must belong to the same network segment.

If the destination IP address is the one of a host, and then the Netmask must be
255.255.255.255.

If the destination IP address is IP network segment, it must match with the Netmask. For
example, if the destination IP is 10.0.0.0, and the Netmask is 255.0.0.0.