e-LinkCare UBREATH PRO PF680 Скачать руководство пользователя страница 8

Страница: 8 / 59

Getting Started

UBREATH® PRO

Spirometer System (Model:PF680) is a bench-top spirometer

designed for professionals that could meet most valuations of pulmonary

function tests and give results both on-spot and HIS/LIS connections for the

maximum subject satisfaction. It is a powerful and compact measurement device

intended for use by a physician (respiratory specialist) to diagnose and

monitoring subjects with COPD and asthma, it can calculate more than 15

parameters including FVC, VC, MVV and corresponding breathing profile tests.

UBREATH® PRO

Spirometer System (Model: PF680) can operate in standalone

mode with a built-in thermal printer, which also helps to be able to streamline

subject information flow and its accessibility for doctors as well as improve

subject care quality and safety over time.
Your

UBREATH® PRO

Spirometer System is carefully inspected and packed for

shipping. However, it is a good practice to thoroughly inspect the outside of the

package for damage. If any damage is noted, please notify the local distributor

and return the damaged device back to them directly.
Carefully remove the package cover and inspect the kit box and check meter and

accessories.
It is important to save all the original packing material, so the device can be

properly packed if it needs to be returned for service or repair.
The original package packaging contains the device with the following

accessories:

Содержание UBREATH PRO PF680




























































Результаты поиска

Содержание UBREATH PRO PF680

Отзывы:

e-LinkCare UBREATH PRO PF680, Руководство пользователя, Страница: 8 / 59

Результаты поиска

Содержание UBREATH PRO PF680

Отзывы: