e-Line Technology SIBELL QDVR-SBE32, Руководство пользователя

Страница: 75 / 150

Record & Disk Management DVR User Manual
68
Post-alarm Record Time: set the time to record after the actual recording is
finished.
Expiration Time: set the expiration time for recorded video. If the set date is
overdue, the recorded data will be deleted automatically.
Encode Parameters Setting
Click Start

Settings

Record

Encode Parameters to go to the interface as shown
below. Set the video encode, resolution, FPS, bitrate and audio of main stream for
each camera in “Event Record Stream” and “Timing Record Stream” interfaces. Click
“Apply” to save the settings. You can set the record stream of each camera one by
one or batch set them for all cameras.
Click Start

Settings

Record

Stream Settings to go to “Sub Stream” interface. Set
the video encode, resolution, FPS and bitrate of sub-stream for each camera in the
interface and then click “Apply” to save the settings.