e-Line Technology SIBELL QDVR-SBE32, Руководство пользователя

Страница: 39 / 150

Camera Management DVR User Manual
32
Camera Management
Signal Access Set
Click Start

Settings

Camera

Manage Camera

Signal Access Set to go to the
interface as shown below.
There are two types of analog signals: TVI and AHD. If the access signal is TVI, you
should check TVI in the following interface to show the camera image normally; if
you check AHD, then there will be no image or the image has no color. The default
selection of the signal is Auto. If you check Auto, then the image of the camera will
be shown normally regardless of the access signal type.
Add/Edit Camera
Add Camera
The network of the DVR should be set before adding IP camera (see
11.1.1 TCP/IPv4
Configuration
for details).
Refer to the pictures below. Click Add Camera in the setup panel or in the top
right corner of the preview window to pop up the “Add Camera” window as shown
below. You can quickly add or add the IP camera manually.