e-Line Technology SIBELL QDVR-SBE32 Скачать руководство пользователя страница 127

Страница: 127 / 150

Device Management

DVR User Manual

120

Device Software Upgrade

You can click Start



Settings



System



Information



Basic to view MCU, kernel

version and firmware version and so on. Before upgrade, please get the upgrade file

from your dealer.

The upgrade steps are as follows:

①

Copy the upgrade software into the USB storage device.

②

Insert the USB storage device into the USB interface of the DVR.

③

Click Start



Settings



System



Maintenance



Upgrade to go to “Upgrade”

interface. Select the USB device in “Device Name” option and go to the path where

the upgrade software exists. Select the upgrade software and then click “Upgrade”.

The system may automatically restart during upgrading. Please wait for a while and

do not power off the DVR during upgrading.

Backup and Restore

You can back up the configuration file of the DVR by exporting the file to other

storage devices; you can recover the configuration to other DVRs which are of the

same model with the DVR by importing the configuration file to other DVRs for time

saving.

Note: The file system of the USB mobile device which is used for upgrading, backing up and restoring

should be FAT32 format.

Содержание SIBELL QDVR-SBE32























































































































































Результаты поиска

Содержание SIBELL QDVR-SBE32

Отзывы:

Бренды по названию

Популярные бренды

e-Line Technology SIBELL QDVR-SBE32, Руководство пользователя

Результаты поиска

Содержание SIBELL QDVR-SBE32

Отзывы:

Бренды по названию

Популярные бренды