![e-ImageData Microfilm ScanPro 1000 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/e-imagedata/microfilm-scanpro-1000/microfilm-scanpro-1000_operators-manual_3093897008.webp)
8
It has been our experience that NOT all computer FireWire ports and NOT all fi rewire cards oper-
ate the same way. It is strongly recommended that you use the FireWire card supplied with your
purchase.
Connect your MICROFILM SCANNER to the COMPUTER using the FireWire CABLE shipped
with your fi lm scanner Fig1. This cable meets all of the specifi cations for this type of connection
and it is strongly recommended that you use only this cable.
Connect the AC/DC Power Inverter to the Scanner and to your local AC power source shown
below, Fig 1.
CONNECTING THE SCANNER TO THE COMPUTER
Power Switch ON/OFF
FireWire Cable Connection
Scanner to Computer
Power Jack
FireWire Connector
Local AC
AC/DC Power Inverter
FireWire Connector
ScanPro 1000
Computer
Fig 1
INSTALLING THE PowerScan SOFTWARE and DRIVER
You can download the latest PowerScan software and the ScanPro1000 SOFTWARE and DRIV-
ER installation instruction sheet from this web page: http://e-imagedata.com/DRIVERS