background image

Available from:

www.modelflight.com.au

Table of Contents

Introduction ..................................................... 2
Specifications .................................................. 3
Additional Required Equipment ......................... 3
Additional Tools and Adhesives ......................... 3
Optional Parts ................................................. 4
Important Information About Motor Selection ...... 4
Before Starting Assembly .................................. 4
Using the Manual ............................................ 4
Warning ......................................................... 4
Contents of Kit/Parts Layout .............................. 5
Warranty Information ....................................... 6
Landing Gear Installation.................................. 7
Aileron Hinging............................................. 11
Aileron Servos and Linkages ........................... 14
Wing Installation ........................................... 18
Stabilizer and Elevator ................................... 20
Rudder and Fin.............................................. 24
Motor Installation ........................................... 27
Rudder and Elevator Servos ............................ 30
Receiver, Battery and ESC Install ..................... 32
Canopy Install ............................................... 35
Cowling Install .............................................. 37
Control Throws .............................................. 39
Center of Gravity........................................... 40
Range Test Your Radio.................................... 41
2004 Official AMA National
Model Aircraft Safety Code ............................ 42

Introduction

Thank you for purchasing the E-flite Mini Funtana 3D
ARF Park Flyer. The Mini Funtana is an extreme 3D
aerobatic electric park flyer, based on the proven
abilities of the popular Hangar 9 FuntanaS airplanes.
We developed this aerobatic performer especially
for park flyers pilots who are looking for great 3D
performance.

The designed characteristics incorporated into the
Mini Funtana, in addition to the lightweight balsa
and light-ply construction, should provide you with
the optimized precision 3D freestyle aerobatics you
desire. We also include plenty of extras like the
carbon fiber landing gear, fiberglass cowl and wheel
pants, and a gearbox that easily accepts one of our
popular Park 400 Brushless Motors (EFLM1100 or
ELFM1105- purchased separately).

Specifications

Wingspan: 37 in (940 mm)
Length: 36 in (915 mm)
Wing Area: 329 sq in (21 sq dm)
Weight w/o Battery: 18.5 oz (525 g)
Weight w/ Battery: 20–24 oz (565–680 g)

2

Содержание Mini Funtana

















Отзывы: