PAGE 1 OF 8
AERONUTS
E-FLIGHT BLADE CX
COMPLETE DISASSEMBLY
JANUARY 2006
THIS IS NOT AN OFFICIAL E-FLIGHT MANUAL OR INSTRUCTION. IT IS BEING PROVIDED FOR INFORMATIONAL PURPOSES ONLY.
AUTHOR ASSUMES NO LIABILITY FOR DAMAGE
–
USE AT OWN RISK.
The E-Flight Blade CX in basically stock form, prior to disassembly. You will be
working with small parts and screws that are easy to lose. Keep a plastic cup or
other container on your work surface to contain screws and/or small parts.
The only tool you will absolutely need for the disassembly (not including mods) is
the precision Phillips head screwdriver (far left) that was supplied in the parts bag
with your Blade CX.
I prefer something with a little more grip, so I use a Stanley precision screwdriver
(center). These are available in a set from just about any retail store (got mine at
WalMart).
You will also find a set of ball link pliers (right) helpful, although not necessary.
Remove the canopy and slide the two CF rods out of the frame and tail section.
To remove skids, grasp strut firmly against body and gently pull strut from battery
holder assembly on bottom of main frame. Do this for each of the four struts.
Gently slide tail section off of frame and antenna.
id24033578 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
