E.F. Johnson Viking VX Series, Руководство пользователя

Страница: 27 / 51

SOFTWARE
3-3
September 1994
Part No. 001-2008-300
To make a programming disk, format a blank
disk using FORMAT B: or FORMAT B: /S (use "/S" if
it must be a bootable disk). Then copy the required
program file or files to the programming disk. To do
this, type COPY A:(filename.ext) B:(filename.ext).
For example, to copy the file qx_pgmr.exe from drive
A to drive B, type
COPY A:2000pgmr.exe B:2000pgmr.exe
This procedure works for either single or dual drive
computers. Refer to your computer reference manual
for more information on these DOS commands.
3.3 SOFTWARE PROGRAMS
When the program is loaded into the computer
and executed, the menu shows the files available from
the directory. The program is used to create, edit,
transfer and receive the Universal Station and channel
parameters described in Section 5.
IMPORTANT
The commands and displays referred to in this
manual are for the IBM PC and may differ from IBM
compatible. Refer to the computer’s operating system
manual for command explanations.
3.3.1 PROGRAM FILES
The files that appear in the program directory are
needed for program operation:
3.4 ALIGNMENT SOFTWARE
The software for the Universal Station programs
the TPI to open and close the audio/data gates neces-
sary for the alignment selected from the Test-Full Uni-
versal Station menu. Under the menu heading Test are
the alignment procedures for the PA (see Section 7.3),
Receiver (see Section 7.1), Exciter (see Section 7.2)
and overall Full Universal Station (see Section 7.4)
including the TPI (see Figure 3-1).
Figure 3-1 REPEATER TEST MENU
.Refer to Section 7 for Alignment Procedures as
shown in the program, alignment points diagrams and
test setup diagrams.
3.5 HELP F1
Help screens are available for most parameters
and options in this program. Whenever a parameter or
options clarification is needed, press F1 and if a help
screen is available it will pop-up on the screen. Press
Escape <ESC> to exit the pop-up screen.
Figure 3-2 LAPTOP INTERCONNECT CABLE
File Edit Transfer Hardware Test Utilities
PA
Receiver
Exciter
RNT Interface
Full Rptr/Station
Telephone Interface
VNC Interface
TO LAPTOP
TO TPI