E.F. Johnson Viking VM600 Series Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 188

E.F. Johnson Viking VM600 Series Скачать руководство пользователя страница 92

6-16

Viking VM600 Mobile Radio Operating Manual

Conventional Features

6.13

Project 25 Mode Features

The following features are unique to conventional P25 channels.

6.13.1 Digital Unit ID

Each radio that operates on Project 25 (digital) channels is programmed with an up-to-
eight-digit unit ID. This ID is unique for each radio and can be any number from 1-
16,777,215. When power is turned on with a Project 25 channel selected, this ID is briefly
displayed.

6.13.2 Talkgroup ID

Each Project 25 channel is programmed with a group ID that determines which group of
radios will receive the call. A call is received on a channel if a selected or scanned channel
is programmed with that ID and the correct NAC is detected (see following). Group IDs
can be any number from 1-65,535. Group ID detect can be disabled by the Normal/
Selective squelch function described in Section 6.4 and the Monitor Mode described in
Section 6.2.

6.13.3 Network Access Code (NAC)

Project 25 conventional channels also use a NAC (Network Access Code) to control which
calls are received on a channel. The NAC can be 1-4095, and each transmit and receive
channel can be programmed for a different code. Other operation, such as monitoring
before transmitting, is similar to that of analog channels. NAC (and group ID) detect can
be disabled by the monitor mode described in Section 6.2.

6.13.4 EFJohnson System Out of Range Indicator

The radio can be programmed to provide an out of range indicator when used on an
EFJohnson Infrastructure system. If the radio fails to receive the beacon signal from the
system, then (if programmed) an out of range status will be indicated on the radio by a
tone, display, or tone and display.

Draft 4/29/2014

«
...
90
91
92
93
94
...
»

Содержание Viking VM600 Series





























































































































































































Отзывы:

Нет отзывов