E.F. Johnson Viking VM600 Series, Руководство по эксплуатации, Страница: 47 / 188

Viking VM600 Mobile Radio Operating Manual 4-3
General Operation
The user can power the radio completely down by pressing the option button programmed
for this purpose (F2 or F6).
If the user presses the ON/OFF/Volume knob while soft is in effect, the radio returns to
full power up operation.
4.1.2 Power-Up Password
The power-up password feature prevents unauthorized use of the radio by requiring that an
eight-digit password be entered to make it operational. This feature is enabled or disabled
by programming.
When it is enabled, “ENTER PSWD” is briefly displayed when power is turned on, the
eight-digit numeric password must be entered by pressing and rotating the Select switch.
A single beep sounds when the switch is pressed (if that option is enabled). If an incorrect
password is entered, “INCORRECT” is displayed and it must be re-entered.
An enhanced password scheme allows up to four power-on (user) passwords, download
and upload passwords, and a master password to be programmed.
The current User password can be changed if the “PW CHG” option switch is
programmed. Selecting this function displays prompts for entering and confirming a new
password.
4.1.2.1 Programming Passwords
Passwords are programmed using Armada. The applicable radio must be connected to the
computer and powered up to display this screen.
Note
Any password changes made to the radio will be immediately applicable when Password
Management is exited.
4.1.2.2 Lost Passwords
If a password is lost, contact customer service.
4.1.2.3 Changing Passwords
An assigned password can be changed by the user if the PW CHG option switch is
programmed. Selecting this function displays prompts for entering and confirming a new
password.
Draft 4/29/2014