manualshive.com logo in svg

E.F. Johnson 7243 LTR-NET, Руководство по обслуживанию, Страница: 53 / 115

Поделиться
Скачать
E.F. Johnson 7243 LTR-NET Скачать руководство пользователя страница 53

PROGRAMMING

3-10

November 2001

Part No. 001-7240-001

grammed by the user. Numbers of up to 16 digits can 
be entered, and entering a “@” produces a 1-second 
pause (each “@” counts as one of the 16 characters). 

Telephone Numbers Screen

3.6.8 EDIT LOCALITY SCREEN

The Edit > Localities menu parameter (see Figure 

3-3) or equivalent buttons in the toolbar are used to 
select the screen that sets up and edits localities. As 

described in Section 2.3.12, a locality is a single 
repeater site, and it is programmed with the repeaters 
at that site. Up to approximately 25 LTR-Net or 60 
LTR or conventional localities can be programmed. 
The functions that can be selected by Edit > Localities 
menu are as follows:

 Edit > Localities > Create New - Creates a new 

locality. The screen that is displayed and its parame-
ters are described in Table 3-2. The frequency band is 
selected on the radio type screen (see Section 3.6.2).

 Edit > Localities > Edit Existing - Edits a 

current locality. The locality to be edited is selected 
from a list. The screen that is displayed and its param-
eters are described in Table 3-2. 

 Edit > Localities > Delete Locality - Deletes a 

locality. 

Edit > Localities > Test Locality - Creates a locality 
that is used for test purposes. Currently, test localities 
are not used.

Table 3-1   Menu and Option Switch Parameter Descriptions

Parameter

Menu 

Item

Option 

Switch [1]

Description

Backlight

X

On = Turns on briefly when a key is pressed, Off = Always disabled.

Bank Select

X

Selects banks when two or more are programmed (Section 2.4.1).

Display Mode Select

X

X

Selects the alpha or numeric display mode. The display mode can also be tog-
gled by FCN STR or STR option switch (Section 2.3.4).

Monitor

X

Turns the monitor mode on and off (Section 2.11.2).

Roaming On-Off

X

Turns roaming on and off (Section 2.9.4).

Scan Type Select

X

Selects group, system/group, or no scanning (Section 2.6.3).

Scan Continue

X

Turns the scan continue feature on and off. This timer limits the amount of 
time a message is received while scanning (Section 2.6.9).

Scan List Save

X

When “on” is selected, changes to the scan list are saved (Section 2.6.7).

Tone Type Select

X

Selects the tones that sound (All, Alert, Key, Silent). See Section 2.4.12.

Any Keypad Function 
except 0-9

[1]

Programmable Functions: FCN, Scan, SYS, RCL, GRP, CLR, Home, Phone, 
Dial, Menu, Squelch Adj., S.A/D, G.A/D, Send, Store, 

,  , 

, 

, and 

Monitor.

[1] The option switches can also be programmed for any of the functions that are selectable by the keypad keys except 0-9. 
For example, scanning can be turned on and off by the FCN SCAN keys and by an option switch programmed for the Scan 
function. (The FCN key is not pressed when the alternate function of a key is selected by an option switch.)

#

Содержание 7243 LTR-NET




















































































































Отзывы:

Нет отзывов