manualshive.com logo in svg

E.F. Johnson 7243 LTR-NET, Руководство по обслуживанию, Страница: 48 / 115

Поделиться
Скачать
E.F. Johnson 7243 LTR-NET Скачать руководство пользователя страница 48

PROGRAMMING

3-5

November 2001

Part No. 001-7240-001

Figure 3-2   Main Window

Title Bar -

Menu Bar -

Status Bar -

Toolbar -

 Status/

U208

Memory

Left

U150

Memory

Left

Radio Type

Being Programmed

Function

1. Select Edit > Radio Type and the displayed screen 

selects the Type, Tier, Frequency Band, and Band-
width of the programming file (Section 3.6.2).

2. Select Edit > Basic Radio Params (Parameters) or 

click 

 to display the following screens which 

program other radio-wide parameters:

Basic Parameters - Select this screen by clicking 
the tab at the top, and choose the desired configura-
tion for each parameter (Section 3.6.3).

Timing Parameters - Select this screen by clicking 
the tab at the top, and choose the desired configura-
tion for each parameter (Section 3.6.4).

Menu Parameters - Select this screen by clicking 
the tab at the top. Checking the box enables the 
parameter in the menu mode, and the drop down 
menu programs the default configuration (Section 
3.6.5).

Portable Key - Select this screen by clicking the tab 
at the top and then choose the function for each key 
from the drop-down menu (Section 3.6.6).

Telephone Numbers - Select this screen by clicking 
the tab at the top and then enter the preprogrammed 
telephone numbers. (Section 3.6.7).

3. When all parameters in the Radio Parameters 

Screens are programmed, click the OK button to 
save all changes or the Cancel button to exit without 
saving changes.

3.4.4 LOCALITY PROGRAMMING

In general, a locality is a repeater site. At least 

one Locality must be programmed before any Systems 
can be programmed, and at least one System must be 
programmed before a Group can be programmed and 
likewise for banks. Proceed as follows to program 
localities (Section 3.6.8):

Create New Locality - Select Edit > Localities > 
Create New or click 

 in the toolbar. 

NOTE: The frequency band is selected in the radio 
type screen. 

Edit Locality - Select Edit > Localities > Edit 
Existing or click 

 in the toolbar.

Delete Locality - Select Edit > Localities > Delete 
Locality or click 

 in the toolbar.

When all parameters in the Locality screen are 

programmed, click the OK button to save all changes 

Содержание 7243 LTR-NET




















































































































Отзывы:

Нет отзывов