E.F. Johnson 5300 SERIES Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 67

background image

49

DETERMINING AVAILABLE OPTIONS

SECTION 8 DETERMINING AVAILABLE OPTIONS

8.1 GENERAL

This manual describes the operation of all

features that are currently available for the 5300 radio.
However, many of these features are optional and
therefore may not be available in your radio. For
example, Project 25 trunked operation is optional and
may not be available.

Availability of optional features is controlled by

factory programming of the control logic. Only those
features that are specifically ordered and enabled in a
particular radio are available for use and can be
programmed. The features controlled by factory
programming are as follows:

P25 Options

•

P25 conventional mobile data

•

P25 trunked mobile data

•

P25 conventional operation

•

P25 trunked operation

Encryption Options

•

DES

•

DES-XL

•

DES-OFB

•

AES

[1]

OTAR Options

•

OTAR P25 conventional

•

OTAR P25 trunked

Trunking Options

•

STAR roaming with P25 trunked operation

•

SMARTNET analog operation

•

SmartZone analog operation

•

Digital SMARTNET/SmartZone

•

Multi-Net operation

Feature Options

•

Keypad programming (Fed Gov’t users only)

•

DTMF Keypad support (5100 only)

•

512 channels/talk groups (5100 only)

•

Zonefail site lock

[1] AES encryption is available only with ARM code 1.20.0

or later (and all 2.0/3.0 versions).

Currently, the only operating mode that is stan-

dard with all models is the conventional analog mode.
Other variables such as frequency range are hardware
dependent instead of software dependent.

8.2 UPGRADING A RADIO WITH NEW OP-

TIONS

The capability exists to upgrade radios in the field

with new features. A new feature can be purchased
and a special encrypted code string keyed to the ESN
(Electronic Serial Number) of the radio is then
provided by the EFJohnson Company. This string is in
the form of a computer file, and is downloaded to the
radio using the PCConfigure programming software.
This is initiated by clicking the “Update Options”
button on the Radio Options screen shown in
Figure 8-1.

8.3 USING PCCONFIGURE TO DETERMINE

OPTIONS

To determine what software options have been

enabled in a particular radio, it is recommended that
you use the PCConfigure™ programming software to
read and display what options are installed. Proceed as
follows:

1. Connect the computer to the radio and start the

program as described in the documentation included
with the PCConfigure software.

2. Select the 5300 radio type by selecting menu

parameter

Radio > Series > 5300 Mobile

.

3. To display the Radio Options screen shown in

Figure 8-1, select

Transfer > Read Options From

Radio

.

4. The check boxes indicate which options are enabled

in the radio. They are for informational purposes
only and cannot be edited.

«
...
47
48
49
50
51
...
»

Содержание 5300 SERIES




































































Отзывы:

Нет отзывов

Похожие инструкции для 5300 SERIES

Бренд: Teac Страницы: 17

Бренд: Uniden Страницы: 72

Twintalker 7100

Бренд: Topcom Страницы: 22

Бренд: EKO Страницы: 12

Бренд: Cobra Страницы: 27

Бренд: THOMSON Страницы: 10

Бренд: LENCO Страницы: 79

Бренд: Ocean Digital Страницы: 9

AM/FM PLL CLOCK/TABLE RADIO 12-1632

Бренд: Radio Shack Страницы: 8

Бренд: GE Страницы: 148

Бренд: Motorola Страницы: 4

Бренд: Motorola Страницы: 65

Бренд: Motorola Страницы: 128

Бренд: Motorola Страницы: 82

MH230R - Range FRS/GMRS Radio

Бренд: Motorola Страницы: 2

Бренд: BTECH Страницы: 83

ICF-CD543RMSIL - Kitchen Cd Clock Radio

Бренд: Sony Страницы: 2

ICF-CD553RM - Cd Clock Radio

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды