SMARTNET/SMARTZONE/P25 TRUNKED FEATURES
41
6.6.2 PLACING A TELEPHONE CALL
Recalling From A List
1. With a SMARTNET/SmartZone channel selected,
momentarily press the
PHONE
option switch. The
tag (alias) of the last called telephone number is
displayed.
2. If required, rotate the Select switch to display the
desired number. The tag of each number is
displayed.
3. Press and then release the PTT switch and
“DIALING” is displayed. One of the following
conditions then occur:
•
If the access is successful, a dial tone sounds and
the dialed number is displayed and sent. Either
ringing or a busy signal is then heard as with a
standard telephone call. When the called party
answers, press the PTT switch to talk and release it
to listen (since the radio operates half-duplex, it is
not possible to talk and listen at the same time).
Each time the PTT switch is released, a go-ahead
tone is sent to the landside party to indicate when
they can respond. To dial a number after the
connection is made, press the PTT switch and dial
the number using the microphone keypad (if
available).
•
If the selected telephone number is not valid,
“INVALID” is displayed and an alert tone sounds.
Select a valid number.
•
If the system is busy, “BUSY” is displayed and the
busy tone sounds. The call automatically proceeds
when the system becomes available.
•
If you are out-of-range or the radio cannot be
accessed for some reason, “NO PHONE” is
displayed and an alert tone sounds.
•
If the interconnect call you are making or the
selected secure mode is not authorized, “REJECT”
is displayed and an alert tone sounds.
•
If your radio does not have the proper encryption
key, “KEYFAIL” is displayed and the call must be
made in the clear mode by pressing the Clear/
Secure option key (if strapped to switchable).
Otherwise, load the correct key.
4. When the telephone call is finished or it could not be
completed for some reason, end it by pressing the
PHONE
option switch and placing the microphone
back on-hook.
6.6.3 RECEIVING A TELEPHONE CALL
1. When a telephone call is received, “ringing” similar
to a standard telephone is heard and “PHONE” is
displayed.
2. To answer the call, press the
PHONE
option switch
and press the PTT switch to talk and release it to
listen (since the radio operates half duplex, it is not
possible to talk and listen at the same time).
3. When the call is finished, end it by pressing the
PHONE
option switch and placing the microphone
back on-hook.
6.7 CALL ALERT
The Call Alert™ feature allows pages to be sent
and received. With SMARTNET/SmartZone opera-
tion, either the Enhanced Private Conversation™ or
Standard Private Conversation mode may be
programmed depending on the capabilities of the radio
system. With P25 Trunked operation, operation is
similar to the enhanced mode.
Answering a Page
1. When a page is received, five beeps sound and
“PAGE” is displayed. The ID of the mobile paging
you is stored as the last ID received.
2. To clear or ignore the page, press any option switch.
If the PTT switch is pressed, a group call is placed
on the selected channel.
