E.F. Johnson Company Viking VM600, Руководство по эксплуатации

Страница: 81 / 207

Draft 02 - Sep 1 2015
Viking Mobile Radio Operating Manual 4-13
Radio Wide Features
4.13.1 Priority Mode Scan Lists
A scan list is simply the channels that are scanned when scanning is enabled. With all
operating modes, as many priority scan lists as are required can usually be programmed
(up to 255). The only limitation is the available memory. Each list can include up to 255
channels/talkgroups. More information follows on selecting and editing priority scan lists.
Note
The selected channel is always scanned.
4.13.1.1 Determining Channels in Priority Scan List
Channels in the conventional priority scan lists are determined as follows. Channels in the
SMARTNET/SmartZone/P25 Trunked priority scan lists are indicated only when editing a
list (see “Editing a Priority Scan List”).
1
Enable Priority scanning as described in Section 4.12.1. Also select the scan list if
applicable as described in the following “Selecting a Priority Scan List” description.
2
Select the desired zone and then scroll through the channels by rotating the Select
switch. When the displayed channel is in the scan list (scanned normally), the
symbol (Standard Control Head) is displayed next to the zone number as shown in the
following illustration. The
(Lightning Control Head) symbol is displayed on the
top of the screen in the following illustration..
4.13.1.2 Selecting a Priority Scan List
Conventional Operation - The scan list is user selectable by the SCAN option switch.
The scan list can also be temporarily changed if the Scan (List) Select option switch is
programmed or by pressing/holding the scan button. Refer to Section 5.10.1 for more
information.
SMARTNET/SmartZone/P25 Trunked Operation - The scan list can be temporarily
changed if the Scan (List) Select option switch is programmed or by pressing/holding the
scan button. Refer to Section 6.11.2 for more information.
Both of the above operations are also menu and soft button (Lightning Control Head Only)
selectable.
Note
Only Priority scan lists are selectable.
Scan List Indicator
Channel
Number