17
EE33 Humidity / Temperature Sensor for High Humidity and Chemical Applications
Mounting of sensing probe with flange (accessories):
A mounting flange 12 mm
(1/2")
for the humidity probe and a mounting flange 6 mm
(1/4")
for the
temperature probe are available as accessories.
Order codes:
RH probe (12 mm
(1/2")
)
T probe (6 mm
(1/4")
)
Flange
HA010201
HA010207
Mounting of sensing probe with screw connection (accessories):
A 1/2" ISO resp. a 1/2" NPT screw connection is available as an accessories for mounting both sensing
probes (6 mm
(1/4")
and 12 mm
(1/2")
).
Order codes:
RH probe (12 mm
(1/2")
)
T probe (6 mm
(1/4")
)
1/2" ISO
HA011102
HA011104
1/2" NPT
HA011103
HA011105
5.7 Remote Sensing Probes Type T28
The sensing probes type T28 are optimised for application
in meteorology. Their rotation symmetric design allows
for mounting in a modern ventilated radiation shields, as
it is available with HA010508 (please refer to chapter 12
“Replacement Parts / Accessories”).
6 Electrical Connection
Important note:
The manufacturer cannot be held responsible for personal injuries or damage to property as a result of
incorrect handling, installation, wiring, power supply and maintenance of the device.
The electrical installation of the EE33 shall be performed by qualified personnel only. Observe all
applicable national and international requirements for the installation of electrical devices as well as
for power supply according to EN 61140, class III (EU) and class 2 supply (North America). For EE33
with alarm module (option AM2) or integrated power supply 100 - 240 V AC (option AM3), the metal
enclosure must be grounded during operation.
