7
User Manual EE160 Humidity and Temperature Sensor for HVAC Applications
Output:
Modbus RTU or
BACnet MS/TP
Output:
4 - 20 mA
Output:
0 - 10 V
-
-
-
-
Output:
Modbus RTU or
BACnet MS/TP
Output:
4 - 20 mA
Output:
0 - 10 V
-
-
-
-
EE160-HxTxA6
Connector for configuration adapter
EE160-MxTxA3
Connector for configuration adapter
T-passive connection for M8TxA3/M8TxA6
Output:
Modbus RTU or
BACnet MS/TP
Output:
4 - 20 mA
Output:
0 - 10 V
-
-
-
-
LED indication for EE160-M1TxJ3:
Green LED
- information on normal operation mode:
on
=
everything OK
flashing =
the main board does not recognize the
measurement electronics inside the sensing probe
off
=
no power supply or main board failure
Blue LED
- information during setup with EE-PCS Product Configuration Software and the configuration
adapter:
on
=
adapter connected to EE160 and PC, no
communication with EE-PCS
flashing =
communication in progress with EE-PCS
off
=
adapter not connected to EE160 and PC
4 Setup and Adjustment
The EE160 is ready to use and does not require any configuration by the user. The factory setup of
EE160 corresponds to the type number ordered. Please refer to the data sheet at www.epluse.com/
EE160. The user can change the factory setup with the help ofthe EE-PCS Product Configuration
Software and the USB configuration adapter.
Besides the output scaling the user can change the communication settings for digital interface and
perform one or two point adjustment for humidity and temperature.
EE160-M1TxJ3 (digital output)
Using the USB configuration adapter HA011066 and the EE-PCS Product Configuration Software.
Please note:
The EE160 may not be connected to any additional power supply when using the USB
configuration adapter.
PC
EE160
HA011066