e-con Systems See3CAM CU51, Руководство пользователя приложения

Страница: 18 / 21

See3CAM_CU51 Application User Manual 06-August-2015
www.e-consystems.com | Subject to change without notice Page 18 of 21
7 Opening a RAW image
The See3CAM_CU51 camera stores the images in a RAW (.raw) format. To view these images
the user can use the following steps;
7.1 Installing Irfanview
To open the RAW format image, the user can use any raw image viewer application. The
following section describes the method of viewing RAW images using a third party application
“Irfanview”.
The application can be downloaded from
http://www.irfanview.com/main_download_engl.htm and
the user should install it to proceed to the next step.
7.2 Selecting image properties
Once the application is installed the user can open the image by double clicking it. Irfanview will
show a property page indicating the properties to be selected. In this the following fields need to
be changed according to the image.
1. Image width
– This is to be set at 640(for 640x480) or 1280(for 1280x720) or
1920 (for 1920x1080) or 2592 (for 2592x1944).
2. Image height
– This is to be set at 480(for 640x480) or 720(for 1280x720) or
1080 (for 1920x1080) or 1944 (for 2592x1944).
3. Bits Per Pixel (BPP)
– Select 12 BPP and select Not Normalized sub option.
4. Check on Vertical flip check box to avoid a glitch in the irfan view application that shows
flipped images.
5. Check on
don’t show this dialog again
if multiple images of same resolution are to be
viewed.
6. Once selected, click OK to view the image.