e-con Systems See3CAM-81, Руководство пользователя приложения

Страница: 5 / 22

See3CAM_81 Application User Manual 29-May-2017
www.e-consystems.com | Subject to change without notice
Page 5 of 22
The See3CAM_81 has the following camera controls namely,

Brightness

Contrast

Saturation

Sharpness

White Balance (both manual and automatic)

Focus(both manual and automatic)
This document explains the following things.

Selecting the supported preview resolutions.

Selecting the still image resolution.

Capturing still images.

Using supported controls.

Getting the Unique ID of the camera
5
Pre-Requisites
This section describes the high level instructions to install the See3CAM_81 on a PC.
Please refer the Getting Started manual for more detailed installation steps and pictures of the
same.
5.1 Installation of the See3CAM_81 and Drivers
Follow the following steps to initialize the device with the host computer

Connect the one end of the USB 3.0 cable to the USB 3.0 connector provided at the
back of See3CAM_81, and connect the other end to the USB 3.0 host controller on
the computer. The device takes about 10 seconds to enumerate.

Once connected the LED light on the device will glow indicating that See3CAM_81 is
powered up and ready to use.

As See3CAM_81 is a generic USB Video Class device windows will automatically
detect all the drivers and it will be installed. This happens for the first time and from
the second time device will be detected immediately by the host PC and will be ready
for use.

To see the preview the e-CAMView application designed for See3CAM_81 has to be
installed. The installation steps are given in the
section 5. Installation of e-
CAMView of the e-CAMView Installation Manual for See3CAM_81 document.