ecamguvcview e-CAM51_USB Linux Application User Manual
17 August 2012
www.e-consystems.com
|
Subject to change without notice
Page 5 of 34
|
└── share
|── doc
|
├── ecamguvcview_Build_&_Install_Guide.pdf
|
├── e-CAM51_Linux_App_User_Manual.pdf
|
└── e-CAM51_Linux_XU_Library_Specification_Manual.pdf
|── README
|── src
└── ecamguvcview-src-1.4.1
6 Launching the Application
Connect the e-CAM51_USB camera to the Linux Development System.
Refer „ecamguvcview_Build_&_Install_Guide.pdf to install the application in the linux system.
Launch the ecamguvcview from the terminal as shown in the figure 1 below.
Figure 1 Terminal Window where application is launched
Some of the linux distribution needs the user to run the application in the super privilege mode.
Then add sudo before the application command.
To run in superuser privilege mode , run with sudo -i ecamguvcview. For more information, refer
README file in the delivery package.
When application is launched, control window and video display window will appear as shown in
figure 2 below.
