05
06
Wall Mount Controller
Wall Mount Controller
1000 Series E-Fence
1000 Series E-Fence
①
Power Switch :
The containment system can be turned on or off by sliding the POWER
switch to the ON or OFF position.
②
Field Width Adjustment Dial :
Field Width Adjustment Dial controls the
distance from the wire. The dog receives the warning tone and containment
stimulation. To increase the field width, simply turn the dial clockwise, to reduce the field
width, turn it counter-clockwise. A minimum of 6' containment field is suggested.
③
Alarm Volume Adjustment :
When containment
system senses an error, there will be an alarm to alert
the user. Alarm volume can be adjusted by sliding
Alarm Volume slide switch.
④
Warning Tone :
If warning tone is turned “ON”,
there will be a warning tone with containment stimula
-
tion. Default value is “ON”.
②
⑧
LCD Display
①
⑤
⑦
③
④
⑥
⑤
Dog Size Selector :
Dog Size Selector consists of small(SM), medium(MED), and
large(LG) options. The below chart is a recommended starting point. Dogs of different size
exhibit varying sensitivities to stimulation. You, the owner, are better at determining the
tolerance and temperament of your dog. It is recommended to start lower and adjust
upwards until
the boundary is well understood.
⑥
Stimulation Level Control :
The correction level of each collar receiver is set separately.
Stimulation
levels consist of 11 settings from “1” to “H (10)” stimulation levels and "0" (tone
only). You can change the level by pressing up & down arrow button. Default value is tone
only. If you select tone "0" (tone only), there will be no stimulation. The output
of each
level varies depending on the dog size setting selected. See chart below.
⑦
Collar Receiver Setting Button :
To change the setting of a collar receiver, place the
collar receiver on top of the controller and press the set button. ( See section 8. “Customiz
-
ing
the Collar Receiver” for more details.)
⑧
Status Light and Alarm :
The status light and LCD display
provide the operational condition of the
wall mount transmitter.
SM
Less than 20 lb dogs
MED
From 10 lb to 50 lb dogs
LG
Larger than 50 lb dogs
9
10 (High)
LG
SM
9 10
MED
9
10
Power Failure
(Operating on Batteries)
Backup Batteries Low
Broken Wire
(Alarm On)
Blinking 'P'
Blinking 'b'
Blinking '-'
Blinking
Dot
Normal
Operation
Status Light
Solid Red
Solid Red
Blinking Red
Solid Blue
LCD Display
Condition
