E-Bike CITY BIKE, Оригинальное руководство по эксплуатации

Страница: 44 / 112

Install the components of the bike
42
Install the components of the bike
The bike is normally pre-assembled. You still have to install the following
components, or have them installed.

front wheel

handlebars

saddle including the seat post

pedals

fine adjustment of the gearshift.
Install the front wheel
Proceed as follows to install the front wheel with wheel nuts:

Loosen the wheel nuts on the front wheel by turning them in a
counter-clockwise direction. Do not remove the wheel nuts.

Put the bike upside-down. To do this, the handlebars and saddle
must be installed.

If there are disc brakes, make sure that the brake disc is inserted in
the brake calliper.
For other brake systems, you might have to open the brake so that the
front wheel can be installed. Remove the safety devices.

Insert the front wheel into the recesses of the fork as far as it will go.
The ends of the fork must be between the two washers on the axle of the
front wheel.

Tighten the nuts.
If you opened the brakes, then they must be closed again.